Diesel flie-fit(Diesel Flow Fit)

DESCRIPTION Diesel Flow Fit is a combination of different high-molecular, ash-free additives in a carrier fluid. This product controls the growth of paraffin crystals caused by the cold significantly improving the filtration properties and pour point of diesel fuel in cold weather. The effectiveness of the flow improver is dependent on the type of paraffin and the paraffin content of the medium distillates.-

PROPERTIES - secures winter operation which would otherwise be affected by the cold

TECHNICAL
DATA Colour : pale/clear
Density at 20 °C : 0.90 g/cm3
Viscosity at 20 °C : 3.6 mm2/s
Ash content : 0.01 (wt %)
Flash point : 64 °C
Pour point : - 21 °C
Improvement in
filtration EN 116 : up to 10 °C, depending on diesel quality
Dosage : 150 ml portion pack sufficient for
50 litres diesel fuel, corresponds to 1:330

APPLICATION Used for all grades of diesel fuel to secure winter operation which would otherwise be affected by the cold in passenger and commercial motor vehicle diesel engines as well as buses, construction machinery and stationary diesel engines.

INSTRUCTIONS For optimum effect in preventing paraffin separation, it is necessary to add the flow improver approx. 5 °C before the cloud point (turbidity point) is reached.
To improve mixing, add Diesel Flow Fit before filling up with fuel.
Clusters of paraffin crystals which have already formed in the tank cannot be broken up by adding Diesel Flow Fit.

AVAILABLE
PACK SIZE Diesel Flow Fit 150 ml Part no. 5130
150 ml Part no. 1877